8
6: Check each of the tabs and verify the following settings:
· IP Address: Select Obtain an IP address from a DHCP server.
· DNS: Let all fields are blank.
· WINS: Let all fields are blank.
·
Routing: Let all fields are blank.
7: Click OK to confirm the setting. Your PC will now obtain an IP address automatically
from your Broadband Router’s DHCP server.
?Note:
Please make sure that XRT-401E’s DHCP server is the only DHCP server
available on your LAN.
Once you’ve configured your PC to obtain an IP address automatically, please proceed to
Step 3.
3) Once you have configured your PCs to obtain an IP address automatically, the router’s DHCP
server will automatically give your LAN clients an IP address. By default XRT-401E’s DHCP
server is enabled so that you can obtain an IP address automatically. To see if you have
obtained an IP address, see Appendix A.
Note: Please make sure that XRT-401E’s DHCP server is the only DHCP server available on
your LAN. If there is another DHCP on your network, then you’ll need to switch one of the
DHCP servers off. (To disable XRT-401E’s DHCP server see chapter 3 LAN Port)
4) Once your PC has obtained an IP address from your router, enter the default IP address
192.168.0.1 (broadband router’s IP address) into your PC’s web browser and press <enter>