Filter
Top Products
26
3.2.3 PPPoE Your ISP requires PPPoE connection.
3.2.4 PPTP Your ISP requires you to use a Point-to-Point Tunneling
Protocol (PPTP) connection.
3.2.5 L2TP Your ISP requires L2TP connection.
3.2.1 Dynamic IP
Choose the Dynamic IP selection if your ISP will automatically give you an IP address. Some
ISP’s may also require that you fill in additional information such as MAC address (see chapter 2
“Cable Modem” for more detail). Select Big Pond if your ISP requires the Big Pond protocol to
connect you to the Internet.
Parameters Description
BigPond Select <Enabled> if your ISP requires the Big Pond protocol to
connect you to the Internet.
3.2.2 Static IP Address
Select Static IP address if your ISP has given you one or more IP address for you to use. Your
ISP should provide all the information required in this section. (See chapter 2 “Fixed IP” for more
detail)