Filter
Top Products
30
You must manually establish and terminate the connection.
MPPE Select <Enabled> to enable “Microsoft Point to Point
Encryption” ability.
3.2.5 L2TP
Select L2TP if your ISP requires the L2TP protocol to connect you to the Internet. Your ISP
should provide all the information required in this section.
Parameter Description
WAN Interface Settings To configure WAN Interface IP
Dynamic IP The ISP requires you to obtain an IP address by DHCP before
connecting to the L2TP server.
MAC Cloning
Select <Enabled> to allow replacing the WAN MAC address
with a specific MAC address.
MAC Address