Filter
Top Products
E-52
Setup
Start Logo Capture
This executes image capture.
See "Startup Logo Creation" on Page E-57 for information about using logo
capture.
Select item name “Logo Capture”, press the ENTER button, and the sub menu
will open.
Select “Start Logo Capture” and press the ENTER button.
There is a change to the capture range selection display.
Note:
Selection is not possible in the absence of a signal.
Movement of the Capture Range
Use the SELECT ̆̄̇̈ buttons to move the red frame.
Width/Height Adjustment of the Capture Range
The MENU button will switch between the height adjustment and the width
adjustment.
There is a change to the display of the selected “Adjust Capture Region Height”
or “Adjust Capture Region Width”.
Adjust the capture range (i.e., red frame) with the remote control “+”/“–” but-
tons.
To Cancel
Press the CANCEL button. There is a change to the menu display.
Starting Capture
Press the ENTER button start the capture.
Red
Green
Blue
Logo Position
Caputure mode
Invalidata Logo
Logo Background Black
Real
High Quality
Logo Scaling
Start Logo Capture
Preview
0
0
0
Move Capture Region.................................
Adjust Capture Region Height.........................
Toggle Width/Height Adjustment ................... “MENU”
Start .........“ENTER” Exit .........“CANCEL”
Move Capture Region ................................
Adjust Capture Region Height .......................
Toggle Width/Height Adjustment ..............“MENU”
Start .........“ENTER” Exit .........“CANCEL”
Display for capture selection
Preview
This is used in checking the logo capture display at startup time. Selec-
tion is not possible without using capture.
See "Startup Logo Creation" on Page E-57 for information about using logo
capture.
Select item name “Logo Capture”, press the ENTER button, and the sub menu
will open.
Select “Preview” and press the ENTER button to preview the image.
To close, press the CANCEL button or the ENTER button.
Blue
Logo Position
Caputure mode
Invalidata Logo
Real
High Quality
Logo Scaling
Start Logo Capture
Preview
0