Filter
Top Products
E-55
Info.
• Select menu name "Info.".
See "Menu Operation Method" on Page E-35 for information about performing menu operations. The
item name display will differ depending on the input signal. See "List of Item Names Offering Input
Selection and Adjustments/Settings" on Page E-41.
Status
This displays information about the equipment.
Select item name “Status” and press the ENTER button.
There is a change to the status display.
Press the CANCEL button to return to the menu.
Display Contents:
Projector model, firmware version, and the internet home page ad-
dress of PLUS Vision Corp.
Factory Default
Lamp Timer Reset
Lamp Timer
Status
1h
U2 Series
Version : 1 . 0 . 0 . 0 . 0
www.plus-vision.com
Factory Default
This function returns the adjustments and settings of all the in-
put sources to the standard factory default values.
Select item name “Factory Default” and press the ENTER button.
There is a change to the display [Press "ENTER" to Factory Default
Set].
Press the ENTER button to initialize.
To cancel, press the CANCEL button and there will be a return to the
menu.
Items that are not set to the factory default:
Projection method, Language and Lamp Timer
Factory Default
Lamp Timer Reset
Lamp Timer
Status
1h
Press “ENTER” to Factory Default Set
Press “ENTER” to Lamp Timer Reset
Lamp Timer Reset
This function resets the lamp timer. Be sure to perform the
reset operation when the lamp cartridge has been replaced.
Select item name “Lamp Timer Reset” and press the ENTER but-
ton.
There is a change to the display “Press "ENTER" to Lamp Timer
Reset”.
Press the ENTER button to initialize.
To cancel, press the CANCEL button and there will be a return to
the menu.
Factory Default
Lamp Timer Reset
Lamp Timer
Status