Filter
Top Products
2. For Windows 98 & 2000
a. Click on the [Next] button when the “Add New Hardware Wizard” window is
displayed.
b. Select “Search For The Best Driver For Your Device [Recommended]” and
click on the [Next] button.
c. The next window will ask you where to search to find the drive. Select [CD-
ROM drive], and deselect [Floppy disk drives] if it is checked.
d. Insert the Setup/Application CD-ROM, included with your scanner, into your
CD-ROM drive and then click on the [Next] button.
e. Click on the [Next] button in the window that appears. Afterwards, for
Windows 98 users, please skip to Step 4.
f. Windows 2000 users – During the process of the installation, a message
“Digital Signature required” might be prompted. Please ignore it, and click on
[Yes] to continue the installation without any misgiving at your scanner
functioning. Afterwards, please skip to Step 4.
3.
For Windows XP & Me
a. Insert the Setup/Application CD-ROM, included with your scanner, into your
CD-ROM drive.
b. Select “Install The Software Automatically [Recommended]” and click on the
[Next] button.
c. Click on the [Next] button in the window that appears.
4. When the system completes the installation, click on the [Finish] button.
5. Follow the on-screen instructions to install all software that your new USB scanner
requires.
6. After the software is installed, close all open applications and click on the [Finish]
button to restart your computer.
7. After the computer is restarted, you will be prompted to perform the scanner
7