Plustek SC8016U Scanner User Manual


 
26
Attention
DO NOT load more than 100 sheets of
paper (70 g/m
2
, 18 lb.) to the ADF.
Paper scanned from the ADF must be a
minimum of 5.08 x 5.08 cm (2 x 2, W x L).
Make sure there are no gaps between the
document stack and the paper-width slider;
otherwise, the scanned images can be
skewed.
Although the documents should be loaded
firmly in place ensuring optimum scanning
accuracy, they should never be wedged in
so tightly that the process of feeding them
through the scanner is strained.
Do not load additional paper into the ADF
while the unit is feeding and scanning.
PLACING BUSINESS CARDS
1. Vertically load the business cards, headfirst and face down, toward the center
of the ADF and all the way into the ADF until touching the bottom.
For single-sided scans, load the business cards face down.
For double-sided scans, load the business cards in desired order.
2. Adjust the paper width slider to the business card width. The paper width slider
should be gently touching both sides of the business cards.
Attention
Make sure the business cards you wish to
scan are vertically loaded into the ADF.
Don’t load more than 20 business cards in
one batch.