Filter
Top Products
I n s e r ting the carrier into the scanner
1 Open the carrier access door (picture 17).
2 Insert the carrier gently and firmly into the carrier slot as
shown, until you feel it stop (picture 18).
3 Close the carrier access door. The scanner will not scan if the
door is open.
Note: Do not open the carrier access door while a scan is in
process; the scan will be interrupted. The scan will resume
when the door is closed, but the quality of the scan may be
reduced. Scan again with the door closed for best scanning
quality.
4 Initiate the scan from your software. The software will
prompt you when the scan is finished.
Removing the carr i e r
1 When the scan is complete, open the door and remove the
carrier. Remove the film and store it properly to protect it
from dust and fingerprints.
2 Close the carrier access door. The door should be kept closed
at all times to protect the mechanism from dust.
2-14
17 18