Filter
Top Products
SpectraLink 8000 SVP Server: Administration Guide for SRP
PN: 1725-36032-001_G.doc
36
fifo – overrun occurred during reception
alignment – nonoctet-aligned packets (number of bits NOT
divisible by eight)
multicast – packets received with a broadcast or multicast
destination address
TX – Ethernet statistics concerning the transmitted packets during
System Uptime.
bytes – bytes transmitted
packets – packets transmitted
errors – Sum of all transmit errors (heartbeat, late collision,
repeated collision, underrun, carrier)
drop – packets dropped due to insufficient memory
fifo – underrun occurred during transmission
carrier – carrier lost during transmission
collisions – packets deferred (delayed) due to collision
SVP-II Access Points in Use – APs in use by wireless telephones, either in
standby or in a call.‘Last’ is current, ‘Max’ is the maximum number in
use at one time.
SVP-II Access Points in Calls – APs with wireless telephones in a call.
SVP-II Telephones in Use – wireless telephones in standby or in a call.
SVP-II Telephones in Calls – wireless telephones in a call.
SVP-II SRP Audio (Delay) – SRP audio packets whose transmission was
momentarily delayed.
SVP-II SRP Audio (Lost) – SRP audio packets dropped due to insufficient
memory resources.
Software Version
The SVP Server and wireless telephones utilize Polycom
Corporation’s proprietary software that is controlled and maintained
through versioning. The
Software Version screen provides information
about the version currently running on the SVP Server. This
information will help you determine if you are running the most
recent version and will assist Polycom engineering and/or customer
support in troubleshooting software problems.