Filter
Top Products
Release Notes - SIP Application Changes
Page 22 Copyright © 2007 Polycom, Inc.
• 16899: Phone can send a malformed target URI in some NOTIFY messages in
certain scenario
• 17179: Transfer may fail in some scenarios if the Transfer softkey is pressed
before the second party answers
• 17318: Phone does not update presence status (e.g. to offline) when reboot
initiated
• 17422: When using a bridged line, if a call is transferred to an invalid number it
cannot be retrieved
• 17614: Setting the phone’s own status through "MyStat" does not work
properly
• 17868: Boot server password is displayed in Configuration menu if boot server
is specified as a full URL including user name and password
• 17911: Per-registration DND does not work on SoundPoint IP 430
• 17918: call.enableOnNotRegistered parameter is not working correctly
• 17920: Incorrect icon displayed for offline status when using peer-to-peer
presence
• 18078: When using an LCS server, contacts cannot be added on the phone
when the contact list is empty
• 18147: Expansion modules may display solid background if SoundPoint IP 601
or 650 has maximum number of registrations configured and maximum
number of roaming buddies enabled
• 18198: Value of reg.x.callsPerLineKey parameter is not taken into account
when additional calls are placed using hot (static) dialing
• 18297: VAD/CNG Rx synthesis not working on SoundPoint IP 650
• 18333: Received data on any socket resets timeout of all sockets
• 18393: DTMF levels 3dB lower than configured level when RFC 2833 disabled
• 18501: Incoming call is sent to wrong line in some scenarios when the phone
has an active call and reg.x.lineKeys > 1
• 18688: Value of reg.1.callsPerLineKey parameter is not taken into account
when two lines are configured and reg.2.callsPerLineKey is set to default and
there is a call on hold on both lines
• 18772: SoundPoint IP 650 phone does not show ‘HD’ animation when a wide-
band call is transferred to it
• 18773: After a transfer, a SoundPoint IP 650 phone may incorrectly display the
‘HD’ animation when the call is no longer a wide-band call
• 18785: After receiving a transferred call which is not a wide-band call, a
SoundPoint IP 650 phone may incorrectly display the ‘HD’ animation
• 18985: The log render level for the “sip” module cannot be changed
• 19113: Phone sends incorrect authorization header in some hold scenarios