Filter
Top Products
Release Notes - SIP Application Changes
Copyright © 2007 Polycom, Inc. Page 41
• 16075: Phone plays re-order tone when taking call off hold in specific scenario
• 16100: BLA line key status is not maintained in specific scenario
• 16116: Cannot register lines 7 to 12 from SIP configuration menu
• 16149: Line key LEDs for BLA lines can switch from one line key to another in
specific scenario
• 16250: Comfort noise received by phone is handled incorrectly
• 16374: Phone keeps sending NOTIFY if 481 received in early NOTIFY
• 16388: Removed DC bias from Tx signal
• 16429: Web interface does not have configuration options for lines 7 to 12
• 16459: Phone is unable to park a call that is received via ACD final destination
• 16480: BLA Led gets stuck and there is a phantom NOTIFY from the phone in a
particular scenario.
• 16485: Notify Talk is ignored if interval between it and 180 is too brief
• 16565: Dialed digits can be lost if they are dialed too quickly after selecting an
SCA line
• 16599: SoundPoint IP 300 and 301 phones reboot when using G.729 codec in a
conference call with SIP 1.6.6 C software
• 16660: Failover to backup SIP server does not occur when hostname of
primary cannot be resolved via DNS
• 16691: Dialog does not get removed after its expiration time in some
scenarios. This addresses #16374 and #16480.
• 16813: Going on and off hook repeatedly on a shared line may result in the line
showing an active call state when the handset is physically on-hook
• 16915: Phone sends SIP requests to port 5060 regardless of
voIpProt.SIP.outboundProxy.port configuration setting
• 17014: When a shared line call is on hold, using on-hook dialing seizes the last
used line instead of the first available line
• 17284: An unnecessary ACK is sent by the phone if no reply is received within
32 seconds
2.14.4 Configuration File Parameter Changes
.cfg
File
Action Parameter Description
sip added voIpProt.SDP.answer.useLocalPreferences Can be 0 or 1. Use this new parameter to
have the phone use its own preference
list when deciding which codec to use
rather than the preference list in the offer.
Null default = 0 = disabled.