Filter
Top Products
Release Notes - SIP Application Changes
Copyright © 2007 Polycom, Inc. Page 23
• 19124: Setting codec preferences using web interface does not work correctly
for SoundPoint IP 650
• 19252: Phone does not send a final NOTIFY to initiator of transfer if the phone
cancels the transfer before it completes
• 19292: SoundPoint IP 650 phone may freeze after restarting after configuration
changed using one of the menus
• 19427: Phone can display “Cache bounced” error message when submitting
forms from the microbrowser
• 19524: Problems resuming a call which is on hold on a remote bridged line for
a specific SIP server
• 19605: Phone may continue to send INVITE’s in specific scenario if a call is
initiated then ended but the SIP servers are not reachable
• 19664: Phone may reboot in some scenarios with log file showing a Null
pointer in a specific task
• 19702: Receipt of a re-transmitted invalid SIP ACK message may cause phone
to reboot
• 19754: Do Not Disturb key cannot be remapped to Null
• 19827: Phone using Bridged Line Appearance can send corrupt message
header in SUBSCRIBE message
• 19875: Phone should use NTP time to check validity of SSL server certificate
• 19876: Phone will lose some memory if microbrowser displays “Cache
bounced” error message due to unresponsive server
• 19883: Handset sidetone level is 3dB too hot on SoundPoint IP 430
• 35063: Power levels reported via CDP for SoundPoint IP 650 are too low
• 35068: Power levels reported via CDP for SoundPoint IP 601 with EM Power
option enabled are too high
2.7.4 Configuration File Parameter Changes
.cfg
File
Action Parameter Description
phone1 added reg.x.server.y.lcs Refer to Technical Bulletin 5844.
phone1 added dialplan.x.applyToUserSend="1"
dialplan.x.applyToUserDial="1"
dialplan.x.applyToCallListDial="0"
dialplan.x.applyToDirectoryDial="0"
Refer to Technical Bulletin 11572.
phone1 added reg.x.server.y.transport and
reg.x.outboundProxy.transport
Added “TCPOnly” as a possible value for
these existing parameters.
phone1 changed msg.mwi.x.callBackMode="disabled" to
msg.mwi.x.callBackMode="registration"
(for x = 2, 3, 4, 5, 6) [changed for bug
13818]
sip added voIpProt.server.1.lcs Refer to Technical Bulletin 5844.