Filter
Top Products
Release Notes - SIP Application Changes
Copyright © 2007 Polycom, Inc. Page 47
• 15162: Phone clears application log file during a warm boot even if the upload
to the boot server failed
2.18.4 Configuration File Parameter Changes
.cfg
File
Action Parameter Description
sip added voIpProt.server.dhcp.available 1 = check with the DHCP server for SIP
server IP address.
0 = do not check with DHCP server.
Default = 0.
sip added voIpProt.server.dhcp.option Option to request from the DHCP server if
voIpProt.server.dhcp.available = 1.
Allowable range is 128 – 255. There is no
default value for this parameter, it must be
filled in with a valid value.
sip added voIpProt.server.dhcp.type 0 = IP address
1 = string
Type to request from the DHCP server if
voIpProt.server.dhcp.available = 1.
There is no default value for this parameter,
it must be filled in with a valid value.
sip added tcpIpApp.sntp.address.overrideDHCP
and
tcpIpApp.sntp.gmtOffset.overrideDHCP
These parameters determine whether
configuration file parameters override DHCP
parameters for the SNTP server address
and GMT offset. The default is 0 which
means that DHCP values will override
configuration file parameters. A value of 1
means that configuration file parameters will
override DHCP values.
2.19 Version 1.6.4
2.19.1 Added or Changed Features
• 12278: Added support for SAS-VP v3 XML configuration transactions
• 12883: Added sending and processing the “early-only” flag in the “replaces”
header to support RFC 3891 in call pickup
• 12890: Added accepting SDP with telephone-event on the first line
• 13492: Disabled CA certificate expiry checking when SNTP has not been
configured
2.19.2 Removed Features
None.
2.19.3 Corrections
The following issues have been resolved with this release:
• 7707: LED which shows mute and incoming-call and message-waiting status
can show incorrect state
• 8598: There is no "1/A/a" soft key when editing Forward contact