Filter
Top Products
Release Notes - SIP Application Changes
Page 42 Copyright © 2007 Polycom, Inc.
.cfg
File
Action Parameter Description
sip added call.stickyAutoLineSeize Can be 0 or 1.
Set to 1 to make the phone use "sticky"
line seize behavior. This will help with
features that need a second call object to
work with. The phone will attempt to
initiate a new outgoing call on the same
SIP line that is currently in focus on the
LCD (this was the behavior in SIP 1.6.5).
This may fail due to glare issues in which
case the phone may select a different
available line for the call.
Null default = 0 = disabled (this was the
behavior in SIP 1.6.6).
2.15 Version 1.6.6 C (Limited Distribution)
2.15.1 Added or Changed Features
None.
2.15.2 Removed Features
None.
2.15.3 Corrections
• 16250: Comfort noise received by phone is handled incorrectly. Fixed for
SoundPoint IP 300, 301, 500, 501, 600 and 601 phones.
• 16388: DC bias should be removed from Tx signal on SoundPoint IP 300, 301,
500, 501, 600 and 601 phones
2.15.4 Configuration File Parameter Changes
None.
2.16 Version 1.6.6 B
2.16.1 Added or Changed Features
• Add Support for SoundPoint IP 430 hardware platform
2.16.2 Removed Features
None.
2.16.3 Corrections
None