Polycom DOC2560B Server User Manual


 
Chapter 2-First Time Installation and Configuration
2-14
Installing the RMX 4000
The following procedures have to be performed to install the RMX 4000 in
your site:
Mounting the RMX in a rack
Connecting the RMX 4000 to the power source
Connecting the network (LAN, IP and ISDN) cables to the RMX
Mounting the RMX 4000 in a Rack
Either place the RMX 4000 on a hard, flat surface such as a desktop or
mount it on a 19”/23” rack.
To install the RMX 4000 in a 19”rack:
Using rack brackets on the RMX 4000
Install chassis runners supplied by Polycom, in the rack.
Mount the RMX 4000 on top of the rack brackets.
Fasten the RMX to the rack with screws through the eight holes
in the RMX’s front mounting brackets.
Using a shelf
Install the shelf, supplied by the rack manufacturer, in the rack.
Mount the RMX on the shelf.
Fasten the RMX to the rack with screws through the four holes in
the RMX’s front mounting brackets.
For a detailed description of the safety requirements and precautions and the
installation of the RMX 4000 as a standalone, in a 23” rack, or reverse mounting
the RMX 4000 on a 19” rack, see the RMX 4000 Hardware Guide.