Filter
Top Products
Part 10
model will look like the right picture above. Both with numbered items listed
as below. However, there could be some variation to the contents inside
depending on what option items actually installed. When the HDD installed is
the 2.5” type, the HDD mounting bracket, the metal base chassis and the
bottom plate will also look different.
1. Cable Exit For External Connections
2. Cable Tie
3. CD-ROM Bracket For Universal Base
4. Cable Passage To Main Unit For Desktop Mount Application
5. 3.5” HDD Bracket
6. 3.5” HDD Bracket Fixing Screw
7. Power Adaptor In Universal Base
8. Power Adaptor Bracket Fixing Screws
9. UPS Battery Bracket For Universal Base
10. UPS Battery Bracket Fixing Screw For Universal Base
11. UPS Battery
12. Velcro Strap For UPS Battery In Slim Base
13. 2
nd
Cable Exit For Slim Base
CABLE PASSAGE
Please route all cables through the cable passage to main unit in
desktop mount application. Hold the cables together with the cable tie. Pass all
cables for external connections (excl. those for HDD and UPS battery) through
the cable exit. For slim base models in desktop mount application, when cable
connection through a hole on desktop underneath the system is required, please
slide open the auxiliary cable exit on bottom plate and route all external
connections through this auxiliary exit. Then fix back the bottom plate if there
is no option unit to install.
INSTALLING UPS BATTERY
The optional UPS battery is delivered in the
carton if it is ordered. For slim base model, please place
the UPS battery in the direction shown in the right picture
and use the Velcro strap through the 2 standing slits on
base box to fix the battery in
position firmly. Route the battery
connection cable through cable
passage as shown to the battery
connector on the main unit.
Please remove the UPS
battery bracket fixing screw and slide right the UPS
battery bracket to take it out for universal base model
Slim base w/
HDD
removed