Filter
Top Products
Part 14
WIRELESS PRINTER
To access the Posiflex wireless thermal printer
PP7700 in Windows environment except Win CE, a wireless
Dongle DG2000 for this printer must be separately
purchased and installed to one of the serial COM ports in
Jiva system. Please enable the + 5 V DC power support for
this COM port. Hook the Dongle to either top corner of the
Jiva TP / LT system as in the right picture.
DESKTOP MOUNTING
Match the matching pegs on the back of the main unit against the
matching holes on the stand assembly. First aim the matching pegs toward the
upper round part of the matching hole on base stand and make sure that all
pegs are inside the holes. Then slide the main unit down to move the pegs into
the lower slot part of the holes till it clicks. Note that all the cables come out of
the stand from the lower edge and shouldn’t get trapped by this mounting
operation. If later on you want to remove the main unit from the stand, you’ll
have to press down the lock/release button on back of the stand at the time
lifting the main unit.
For desk top/counter mount application, the adjustable stand assembly
requires a space of 376 mm wide and 321 mm deep and can take maximum
total height of 372 mm for slim base models and 402 mm for universal base
models if no upgrade kit installed.
CONNECTING CABLES
To re-assemble the main unit with stand assembly for operation,
please connect all required cables to the appropriate connectors. Please make
sure that each connector is connected to the correct port with the correct
orientation. Damages due to incorrect connection or orientation are not
covered by product warranty!
Some connectors like the LAN or the cash drawer connector have to
be gently inserted until a click is heard. It is recommended that connectors
Matching Holes
Matching Pegs
Round Part
Slot Part
Removal Hollow