Filter
Top Products
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 3 - 4
This battery socket accepts a 3 V button cell Lithium battery (CR2032)
required to support the system real time clock. The jumpers in this window are
designated for COM port power supply function. Please consult your dealer for
technical support on setup of these jumpers. A new Lithium battery can support the
system RTC for about 3 years. After the battery is nearly exhausted, the user must
change a new battery otherwise the system RTC and system configuration setup will
be lost.
JOINING MAIN UNIT AND STAND
Match the matching pegs on the back of the main unit against one of the two
sets of matching holes on the stand. It is recommended to hook on the lower set of
holes for better stability. First aim the matching pegs toward the upper round part of
the hole and make sure that all pegs are inside the holes. Then slide the main unit
down to move the pegs into the lower slot part of the holes till it clicks. Note that all
the cables come out of the stand from the lower edge and won’t get trapped by this
mounting operation. If later on you want to remove the main unit from the stand,
you’ll have to press down the lock/release button on back of the stand at the time
lifting the main unit.
Service
Window
Push Open
To The
Right
4 Matching
Pegs
Matching Holes Matching Pegs
Round Part
Slot Part
Removal
Hollow