Filter
Top Products
Installing the Media Library in a Back-to-Back Configuration 43
Active Archive Appliance (A3) v6.5 PowerFile Confidential Racking and Installation Guide
Installing the Inner Slide Rails on the Rear-mounted
Chassis
To install the inner slide rails:
1. Install the bottom inner slide rails over the keyhole screws in the direction indicated by the
arrow. Repeat this step on the other side of the Media Library.
Media Library Inner Slide Rails and Keyhole Screws
2. Tighten the keyhole screws.
3. Fasten the inner slide rails to the Media Library using the two self-tapping screws you saved in
Step 1 on page 41. Insert two screws on each side of the Media Library.
Media Library Inner Slide Rails and Self-tapping Screws