Filter
Top Products
Installing the Media Library in a Back-to-Back Configuration 49
Active Archive Appliance (A3) v6.5 PowerFile Confidential Racking and Installation Guide
When attached, the prongs on the mounting-bracket flange wrap around the rail and insert in the
screw holes to secure the rail in place.
Mounting-bracket Flange (Attached)
4. Line up the two pins to the appropriate RMU holes on the rack, and then gently push the rail into
place. The mounting-bracket flange will lock automatically in the rack post.
5. On the rack's front vertical post, identify the RMU location where you want to attach the rail.
6. At the front of the rack, position the rail so that the second white mounting-bracket flange rests
against the inside of the rack post.
7. Line up the two pins to the appropriate RMU holes on the rack and then gently push the rail into
place. The mounting-bracket flange will lock automatically in the rack post.
When you are done attaching the rail, it should look similar to the following illustration.
Outer Rail Installed in Rack