Filter
Top Products
Installing the Media Library in a Back-to-Back Configuration 47
Active Archive Appliance (A3) v6.5 PowerFile Confidential Racking and Installation Guide
8. Repeat Step 1 through Step 7 for the left outer rail.
9. To install multiple chasses, repeat steps Step 1 through Step 8 for each front-facing chassis you
plan to install in the rack. Make sure to leave enough room between the rails to accommodate the
stacked 5 RU chasses.
Installing the Outer Rails on the Rear-mounted Chassis
The outer rails attach to the server rack and hold the server in place. The outer rails for the Media
Library extend between 30 inches and 42 inches. No tools are required to attach the outer rails.
To install the outer rails:
1. On the rack's rear vertical post, identify the RMU location where you want to attach the right
outer rail. The right outer rail should be installed at the same level as the right inner slide rail on
the chassis.
Media Library Inner Slide Rail and Outer Rail on Rear-mount Configuration
Note: The rear-facing rails fit directly above the front-facing outer rails.
2. Adjust the rail to the proper distance so that it fits between the front and rear rack posts.
3. At the rear of the rack, position the rail so that one of the white mounting-bracket flanges rests
against the inside of the rack post.
Rear-mounted
Chassis
Inner Slide Rail
Outer Rail