Filter
Top Products
27
Powerware
®
5115 User’s Guide : www.powerware.com
CHAPTER 7
TROUBLESHOOTING
This section explains:
:
Site wiring fault on 120V models
:
UPS alarms and conditions
:
How to silence an alarm
:
Service and support
Site Wiring Fault (120V Models Only)
The Site Wiring Fault indicator on the UPS rear panel illuminates if the
ground wire connection does not exist or the line and neutral wires are
reversed in the line receptacle. This indicator stays on until the
condition is resolved. Have a qualified electrician correct the wiring
fault. The UPS operates when the indicator is illuminated, but does not
provide rated noise and surge suppression.
Audible Alarms and UPS Conditions
The UPS has an audible alarm feature to alert you of potential power
problems. When the alarm is activated, the UPS beeps in different
intervals according to a particular condition. Use Table 9 to determine
and resolve the UPS alarms and conditions.
Silencing an Audible Alarm
To silence the alarm for an existing fault, press the button. If UPS
status changes, the alarm beeps, overriding the previous alarm silencing.
The alarm does not silence if there is a UPS fault, low battery condition,
or if the battery needs to be replaced.