Filter
Top Products
34 Creating Discs
f. Print Settings will launch the Printer Driver settings
when clicked. These settings are described in detail in
Section D: Printer Settings on page 38 of this manual.
g. Set Print disc before recording/Record disc before
printing. Record disc before printing is
recommended for most jobs to avoid printing on discs
that do not burn properly. Print Before Recording is
used for jobs involving Hockey Rink or Business Card
shaped CD-Rs where it is important to print before
recording for proper card alignment.
h. If using Kiosk Mode, choose whether or not to Print
"Reject" on Bad Discs in Kiosk Mode. When enabled,
this will cause a disc that has failed to verify to be
printed with the word REJECT prior to being ejected
from the publisher to make it easier for bad discs to be
identified in the output stack when using the Kiosk
Mode. If this option is not enabled, bad discs will be
ejected with no printing at all.
i. Select the Number of discs requested for this job.
8. Stop Job after Number of Writes Fail allows you to decide
how many consecutive failures the Publisher will accept
prior to canceling a job.Once you have selected your image
and chosen your preferred settings in the Robot Write
Pane, click Start to begin recording your job. You can
queue several different jobs for recording if you like, this
option is described in Section D: Printer Settings on page
38 of this manual.
B.4. Streaming (Automated copying of multiple
original discs)
Streaming is a new, powerful feature that allows you to backup
multiple original discs quickly and easily. Streaming is done as
follows:
1. Launch Discribe.
2. Select CD/DVD Copy.
3. Click Copy CD/DVD and select Streaming from the drop
down menu.
4. Load input bins with the amount of blanks you want to
record for each original followed by the original disc.
Repeat until all originals are loaded. For example, if you
have 5 different original discs and you wish to make 2
510877.qxd 1/13/2004 4:35 PM Page 34
TOC
INDEX