Filter
Top Products
Creating Discs 41
• Kiosk Mode
Kiosk Mode will allow you to increase the capacity of your
Bravo from 25 to 50 discs by dispensing finished discs out
the front of the unit instead of dropping them to the output
bin. This allows you to place blank discs in both the input
and output bins doubling your capacity. An optional
Kiosk Kit is available from your Primera reseller that
contains a custom output bin to catch the finished discs as
they leave the Bravo. This setting will be overridden by
the Kiosk Mode setting in Discribe's Robot Write or Job
Details Pane.
• Print Quality
There are four options for image quality. Keep in mind
that Normal 600 provides the fastest print at lower quality
while Ultra Photo 4800 delivers the best quality at a slower
print speed.
• PrimaColor™
Click on this Check box to enable PrimaColor color
matching. The PrimaColor profiles were written
specifically for the Bravo to give a precise color match
when attempting to print photographic images. If you
are using a third-party color management system, disable
PrimaColor.
• Intensity
The Intensity setting will control the amount of ink
saturation on the disc. When printing onto the Primera
ToughCoat discs, 50% is usually sufficient. When printing
on to other brands of media, or if you would like to print
darker colors, you may wish to increase the Intensity
setting. Please note that higher ink saturation could result
in discs not drying instantly. Also, higher intensity will
result in higher ink usage causing a lower yield of discs
per cartridge.
• Inner Diameter
The inner diameter refers to the size of the non-printed
center on your disc. The size of the center hub can vary
from one type of media to the next. This allows you to set
the inner diameter in millimeters allowing you to print all
the way to the center hub regardless of the type of disc you
510877.qxd 1/9/2004 12:00 PM Page 41
TOC
INDEX