Filter
Top Products
20 Creating Discs
centered when printed on a CD. To do this, refer to the
following steps:
1. Verify that a disc and a color ink cartridge are installed in
the Publisher. It is important to use the same disc you
normally use for your publishing because different brands
of discs may vary slightly in size. Also, verify that the
Publisher is powered ON and that it is connected to your
computer.
2. Click on the Centering Properties Test Print button. The
printer will begin printing the calibration test print.
3. When the print is complete, rotate disc 180º
and put the disc back in the
input bin and
repeat step 2 using the same disc.
4. When the second run of the print is compete,
you should have a test print that looks something like the
following:
5. Along the Vertical axis of the printed disc, find the number
whose lines touch. For example, in the above illustration,
the number would be -6 Enter that number into the Vertical
box of the Calibration window and -9 would be entered for
the Horizontal axis.
-15-12 -9 -6 -3 0 3 6 9 12 15
-15-12-9-6-303691215
-15
-12
-9
-6
-3
0
3
6
9
12
15
Horizontal Calibration
Find the number whose lines touch
-15
-12
-9
-6
-3
0
3
6
9
12
15
Vertical Calibration
Find the number
whose lines touch
Vertical Calibration
Find the number
whose lines touch
Horizontal Calibration
Find the number whose lines touch
-15
-12
-9
-6
-3
0
3
6
9
12
15
-15
-12
-9
-6
-3
0
3
6
9
12
15
-15-12 -9 -6 -3 0 3 6 9 12 15
-15 -12 -9 -6 -3 0 3 6 9 12 15
510141.qxd 10/3/03 1:38 PM Page 20
TOC
INDEX