Filter
Top Products
Rear Panel
This illustration shows the input ports found on the rear panel
of the Publisher:
The FireWire (IEEE 1394) Port receives data that is to be passed
on to the recording drive.
The USB Interface is connected to an open USB port on your
PC with a standard USB cable, included with your Publisher.
The Power Input Port connects to the included 100V~240V 12V
switching power supply.
D. SYSTEM REQUIREMENTS
Before getting started, it is important for you to verify that
your PC meets the minimum system requirements. Here's
what you need in order to successfully copy discs at 8x or
above with the PrimoDVD 2.0 software:
• 450 MHz or faster Pentium III/ IV processor running
Windows 2000 or XP.
• 256MB or greater RAM
• Free hard drive space of at least 2 GB (up to 5 GB for DVD
if recording the entire disc)
• Available PCI Slot for FireWire (IEEE 1394) adapter card or
built in FireWire Port
• Available USB Port
If your PC does not have at least these minimum system
requirements, you probably do not want to install the FireWire
board and software on that PC. System performance will more
than likely not be acceptable.
4 Getting Started
IEEE 1394
FireWire Port
USB Port Power Input Port
510141.qxd 10/3/03 1:38 PM Page 4
TOC
INDEX