Filter
Top Products
40 Printing Using a Macintosh
Config. Utility
Click on the Config. Utility to access the following screen. A
description of each setting on this screen is below.
Clean Cartridge
If it has been more than 48 hours since your last print or if
your print quality has deteriorated with bands or lines it is
recommended that you clean the cartridge. This is done by
clicking the Clean Cartridge button.
Note: You will be prompted to load label stock of 4"x 4" (101.6 mm x
101.6mm) or larger, into the printer. If you have stock of this size
or larger, simply click OK. If not see Section 2I for instructions on
loading a test sheet to complete the purge print.
Change Cartridge
Click the Change Cartridge button to move the cartridge into
position for easy access for replacement. For more information
on this see Section 2H. When installing a cartridge you will
be prompted to align your cartridge as described later in this
section.
510984.qxd 11/21/2006 9:09 AM Page 40
TOC
INDEX