Filter
Top Products
Chapter 1 Introduction 11
11
ST-133 Controller: Controls the camera and experiment, including the temperature set
point. Collects the data and transfers it to the computer for further processing.
Camera-Controller Cable: This 10' cable (6050-0484) connects from the
DETECTOR connector (25 pins) on the back of the ST-133 to the connector
(25 pins) on the back of the camera. Note that the end that connects to the camera has
a right-angle connector and is secured by a slide lock.
User Manuals: PI-SCX System and WinView/32 Imaging Software. The PI-SCX
manual contains the basic setup and operation information for PI-SCX camera
systems. For information about WinView/32, refer to its manual and to the on-line
help supplied with the program.
Note: The system and software manuals may be provided on the software CD
supplied with your system.
WinView/32 CD-ROM: This CD contains the WinView/32 imaging software and
related manuals in PDF format.
Interface Card: Princeton Instruments (RSPI) High-Speed Serial PCI Card or USB
2.0 Card to be installed in the computer. If the computer is purchased from Princeton
Instruments, the interface card will be installed at the factory.
Interface Cable:
TAXI cable: DB9 to DB9 cable (6050-0148-CE is standard) or
USB cable: Five (5) meter cable (6050-0494) is standard
Figure 1. Standard System Components