Filter
Top Products
88 PI-SCX System Manual Version 2.E
88
Dimensions
All dimensions are approximate and subject to change. Refer also to the outline drawings
in Appendix B.
PI-SCX:1300
4.63 in (11.8 cm) width;
4.63 in (11.8 cm) height;
8.71 in (22.15 cm) length;
10 lb (4.54 kg) weight
PI-SCX:4300
6.00 in (15.24 cm) width;
6.00 in (15.24 cm) height;
8.41 in (21.36 cm) length;
35 lb (15.89 kg) weight
Controller TTL I/O
Input: External Sync
Output: (Not Ready) frame start; (Not Scan) shutter/readout status
Controller I/O
Male, D-subminiature 25-pin connector; 8 TTL inputs; 8 TTL outputs
Controller Interface
Female, D-subminiature 9-pin connector for RS232 serial communication
Controller Power Input
Refer to the Fuse/Voltage label on the back of the ST-133 for fuse, voltage, and power
consumption information.
Controller Dimensions
Dimensions: See Appendix B.
Controller Weight: ST-133A: 13 lb (5.9 kg); ST-133B: 12.5 lb (5.7 kg)
Mounting
PI-SCX:1300 The optional Tripod mount provides one each 1/4"-20, 3/8"-16, and M6
mounting hole.
PI-SCX:4096 and PI-SCX:4300 There are two M8 × 1.25 tap (25 mmdeep) and one
1/420 tap (0.5deep).
PI-SCX:4096 ≤ 1.5:1
PI-SCX:4096 >1.5:1
6.00 in (15.24 cm) width;
8.50 in (21.59 cm) width;
6.00 in (15.24 cm) height;
8.50 in (21.59 cm) height;
7.94 in (20.17 cm) length;
9.20 in (23.37 cm) length;
35 lb (15.89 kg) weight