Filter
Top Products
P R I N T E R C O N F I G U R A T I O N
66
This item selects whether the host is able to control the line pitch (Lines
Per Inch) or if it is controlled only by the printer Setup menus.
Host Form Length Control
Host Form Length
Enable
Possible Values: Enable*, Disable
This item selects whether the host is able to control the form length or if it
is controlled only by the printer Setup menus.
Host Bin Select
Host Bin Selec
t
Enable
Possible Values: Enable*, Disable
This item selects whether the host is able to change bin (form) selections or
if it is controlled only by the printer control panel.
Test Mode
Test Mode
Of
f
Possible Values: Off*, EBCDIC Code Dump, Loopback
This item selects the test mode within the CX/TX interface. When set to
Off, the printer will operate normally. When set to EBCDIC Code Dump, the
printer will print the EBCDIC value of the characters received to assist
programmers in software debugging (for more information refer to the
FormsMaster 8000 Series Programmer’s Manual). When set to Loopback,
the interface will perform internal diagnostics and print the result.
Reserved Parameter
(new)Parameter19
(unused)0
Possible Values: (unused)0*, 1 - 255
This item is reserved for future use.