Filter
Top Products
3–7Configuring the Printer
NOTE: If the “Protect Configs.” option is enabled, the new configuration will
not be saved unless the existing configuration has been deleted.
Refer to page 3–19 for details.
Follow these steps to save a new configuration:
1. Press ON LINE to take the printer offline.
OFFLINE
CONFIG. CONTROL
2. Press DOWN.
3. Press NEXT or PREV until the following is displayed:
CONFIG. CONTROL
Save Config.
4. Press DOWN.
5. Press NEXT or PREV to cycle through the options (1–8).
NOTE: Configuration “0” does not appear in this list. It is the default
configuration and can not be altered.
NOTE: If the “Protect Configs.” option is not enabled, the number
configuration selected will be erased in order to write the current
configuration. Make sure the number selected is empty or no longer
required before making this selection.
6. When the desired number is displayed, press ENTER to select it.
If the configuration number has been previously saved
and
the “Protect
Configs.” option is enabled, the following error message is displayed
briefly:
CFG FILE EXISTS
DELETE FIRST
If the configuration number has not been previously saved
or
the “Protect
Configs.” option is disabled, the following is displayed briefly: