Filter
Top Products
3–10 Configuring the Printer
b. Press DOWN.
CONFIG. CONTROL
Load Config.
c. Press DOWN.
d. Press NEXT or PREV until the following is displayed:
CONFIG. CONTROL
Delete Config.
e. Press DOWN.
f. Press NEXT or PREV to cycle through the options (1–8). When
the desired number is displayed (e.g., 1), press ENTER to
select it. The following is displayed briefly:
Deleting Configuration
Then, the following is displayed to indicate the configuration has
been deleted:
Delete Config.
1 *
5. Save the new configuration as described on page 3–6. Make sure you
select the same number (e.g., Config. 1) when saving the modified
configuration. The new configuration replaces the existing one.
6. Print a copy of this newest configuration and store it in a safe place.
Refer to page 3–11 for details.
NOTE: If you want to make these new configuration parameters active at
printer power-up, make sure you select this configuration as the
“power-up config” (page 3–23).