Filter
Top Products
Chapter 3 Error Messages
66
Error Messages
The RFID UHF encoder can detect a number of errors. When one
of these errors occurs, the RFID UHF encoder alerts the printer to
perform the currently selected error action (see “Error Handling” on
page 53) and show the appropriate error message on the printer
display. RFID UHF encoder error messages are explained in
Table 1.
Table 1. Error Message List
Error Message Explanation Solution
RFID MAX RETRY
Check System
Error Handling = Overstrike in
the RFID CONTROL menu,
and the Label Retry count has
been exhausted.
Press PAUSE to clear the
message.
See “Troubleshooting” on
page 67.
RFID Reader
Comm Error
RFID error: communication
cannot be established with
the RFID UHF encoder.
Reader will be set to Disable
in the RFID CONTROL menu
and the previous port settings
restored.
Press PAUSE to clear the
message.
See “Troubleshooting” on
page 67.
RFID TAG FAILED
Check Media
Error Handling = Stop in the
RFID CONTROL menu, and
the RFID UHF encoder could
not read the RFID tag.
Press PAUSE to clear the
message.
See “Troubleshooting” on
page 67.