Filter
Top Products
Chapter 1 What To Expect When Running Your RFID Application
12
• Smart Label Developer’s Quick Setup Guide (this manual)
• Application and reference notes (this chapter)
• Technical support
The Printronix Smart Label Developer’s Kit also contains:
• Two rolls of 500 smart labels with Alien Technology™ Class 1
64 data bits, 915MHz inlays
• One 625 m thermal premium wax ribbon
• Network interface card, which includes Printronix’s PrintNet
®
Enterprise, a remote network printer management software
application.
What To Expect When Running Your RFID Application
Factors Affecting Smart Label Performance
Smart labels are based on an EEPROM technology that requires
some time to be programmed. You may notice this minor pause
between labels. This time is necessary to better ensure consistent
quality and improved reliability.
When dealing with smart labels, it is possible that an occasional
RFID tag may need to be written and verified more than once (retry)
before being considered acceptable. In this event each retry time
will be added to the inter-label pause.
Static electricity can damage the smart labels. Open the media
cover of the printer and touch an unpainted metal part of the printer
before you handle smart labels. This will discharge any static
electricity that may have built up on your hands.