Filter
Top Products
SATAII150 and SATA300 TX Series Quick Start Guide
16
NOTE: There is a SMP issue on the SuSE Linux SMP kernel. If you encounter
problems on SuSE with SMP system, append “acpi=off” parameters into boot
loader or select “Installation – ACPI Disabled” on SuSE Linux SMP.
Existing Installation
1. Boot the Linux system and log in as root.
2. Insert SATAII 150 Driver Disk
3. In a terminal window, enter the following commands:
# mount /dev/fd0 /floppy
# cd /floppy
# sh install
Note: At the prompt answer Yes to load SATAII 150 driver every time Linux
boots.
# cd /
# umount /floppy