Filter
Top Products
Step 5: Set Up Serial Cable Connections
7
Step 5: Set Up Serial Cable Connections
The RS-232 Serial connection enables the Command Line Utility (CLU) on your
PC to monitor and control VTrak.
Figure 6. Serial connector for VTrak M310p/M210p
Step 6: Connect the Power
Plug the power cords and switch on both power supplies on. When the power is
switched on, the LEDs on the front of the VTrak will light up.
Figure 7. VTrak M310p/M210p front panel LED display
When boot-up is finished and the VTrak is functioning normally:
O
I
O
I
Mgmt
CONSOLE
Mgmt
CONSOLE
DB-9 Serial
Connector
Power
Reserved
FRU Status
Logical Drive Status
RAID Controller Activity
Controller Heartbeat