Filter
Top Products
30 ProjectionLink User & Installation Guide
To remotely power the projector:
1. Plug in the power cord and turn on the projector’s main
power switch.
2. Press the power button in the upper right corner of the
transmitter to power the projector.
Powering the projector from the transmitter
The LED blinks orange while the projector’s lamp warms
up. When this LED changes to solid green, the projector is
ready to present.
All Proxima projectors use a warm-up/cool-down period to
ensure the life of the lamp. The transmitter’s LED changes
from green to orange when the power switch on the transmit-
ter is turned off. It continues to blink orange as the projector
completes its warm-up/cool-down procedure.