Filter
Top Products
Mounting the Receiver
38 ProjectionLink User & Installation Guide
Mounting the Receiver
The ProjectionLink receiver includes a pipe mount for use
with ceiling-mounted projectors.
To mount the receiver:
1. Remove the four screws on the sides of the receiver.
2. Attach the mounting pan with four of the 8 mm screws
from the Hardware Kit.
3. Insert the included u-bolt through the eyes on the mount-
ing pan.
4. Bolt the mounting pan and receiver to the pipe using the
flat plate and two hex nuts, securing the projector to the
ceiling.
Receiver pan and u-bolt