Interface Related Features
3-22 PowerScan
®
7000 Linear Imager
ACK NAK Options
This enables/disables the ability of the scanner to support the RS-232
ACK/NAK protocol. When configured, the scanner and/or host sends
an “ACK” when it receives data properly, and sends “NAK” when the
data is in error. Selections for this option are:
•Disable
• Enable for label transmission — the scanner expects an ACK/NAK
response from the host when a label is sent
• Enable for host-command acknowledge — the scanner will
respond with ACK/NAK when the host sends a command
• Enable for label transmission and host-command acknowledge
START
STATE BARCODE
Enable Beep
on ASCII BEL
Disable Beep
on ASCII BEL
Disable Beep
on Not On File
Enable Beep
on Not On File