Filter
Top Products
Interface Features
Product Reference Guide 3-47
Keyboard Wedge/USB Keyboard — cont.
Wedge Quiet Interval
Quiet Interval is the amount of time to look for keyboard activity before
the scanner breaks the keyboard connection in order to transmit data to
the host..
NOTE
This feature does not apply to the USB Keyboard
interface.
START
MODE BARCODE
Selectable from 00 (no interval) to 255 in 10 msec
increments. Use hexidecimal (range: 00 to FF hexidec-
imal) to set the interval. To configure this feature, scan
the “START” bar code above to place the unit in Pro-
gramming Mode, then the
Set Wedge Quiet Interval
bar code followed by the digits from the Alphanumeric
table in
Appendix C, Alpha-Numeric Pad represent-
ing your desired length. Exit programming mode by
scanning the “END” barcode below
DEFAULT SETTING FOR THIS FEATURE:
0A (100 msec)
Set Wedge
Quiet Interval
END