Filter
Top Products
Interface Features
Product Reference Guide 3-27
RS-232 Interface Features — cont.
ACK NAK Timeout Value
START
MODE BARCODE
This item specifies the time the scanner will wait for
an ACK character from the host following a label
transmission.
0 = Infinite timeout
1 - 75 = Timeout in 200-millisecond increments
To configure this feature, scan the “START” bar code
above to place the unit in Programming Mode, then
the “Set ACK NAK Timeout Value,” followed by the
digits from the Alphanumeric table in
Appendix C,
Alpha-Numeric Pad
representing your desired
value. Exit programming mode by scanning the
“END” barcode below
DEFAULT SETTING FOR THIS FEATURE: 01
Set ACK
NAK Timeout
Value
END