Filter
Top Products
Printer Configuration
Figure 7 - Tearing Off Printed Output
MLP 3040 SL Models
The MLP 3040 SL models use cassettes of cut sheet receipt paper. In most cases, the host application program
will issue a Form Feed that will eject the sheet currently being printed so that it is ready for the user to simply
pull out of the printer. If the sheet has not been ejected and the host has finished sending data to the printer, the
paper may be ejected by pressing the
Paper Feed Button.
Battery Charging
The MLP 3040 contains battery monitoring and charging circuitry so that the battery may be charged while still
in the printer. Charging the battery in the printer requires an optional power supply. Psion Teklogix offers
power supplies for use with 100-240VAC/50-60Hz and 12/24VDC for vehicle applications.
Optional external battery chargers are also available so that you can have fully charged batteries “standing by”
when needed.
The printer’s battery status is displayed in the lower right corner of the front panel LCD Display. The status is
displayed as a battery shape which indicates the relative capacity that remains as indicated below.
Fully Charged
Discharged
To charge the battery inside the MLP 3040, connect the power supply to the appropriate source, and connect the
output of the supply to the printer’s power connector shown in
Figure 8.
Caution: Only use Psion Teklogix power supplies to power your printer and charge batteries. Other power
supplies may damage the electronics and printing mechanism. Damage caused by use of a non-Psion
Teklogix power supply will not be covered by the printer’s warranty.
11