Psion Teklogix MLP 3040 Series Printer User Manual


 
Printer Configuration
IP Subnet Mask
IP Subnet Mask
0.0.0.0
Possible Values: 0.0.0.0*, User specified
This feature specifies the range of addresses, or the size of the network, which the printer’s IP address belongs
to.
Note that this feature has no effect if IP Address Method is not set to “Static”.
IP Gateway
IP Gateway
0.0.0.0
Possible Values: 0.0.0.0*, User specified
This feature specifies the network node where data destined for a node outside of the LAN should be directed.
Note that this feature has no effect if IP Address Method is not set to “Static”.
Tunnel Port Number
Tunnel Port#
08023
Possible Values: 00000 … 08023* … 65384
This feature specifies the TCP/IP port to be used for data that is to be printed.
To advance through the character positions, press the
Advance Button. To change the character at the current
position, press the
Increment Button.
Note: This feature is available in printers with firmware revision 2.0 and higher.
Options Menu
OPTIONS MENU
The
OPTIONS MENU contains features that affect how the printer operates regardless of how features in other
menus have been set.
After entering Setup as described earlier in “
Setup Basics”, press the Advance Button until “OPTIONS
MENU
” is displayed on the top line. You may now do one of the following:
press the
Enter Button to review and/or change the features available, or
29