Psion Teklogix MLP 3040 Series Printer User Manual


 
Printer Configuration
Local Name
Local Name
MLP 3040-
AAANNNNN
Possible Values: MLP 3040-aaannnnn*,
Up to 16 characters of “0” through “9”, “A” through “Z”, “a” through “z”, “-“, “_”, SPACE
This feature sets the name that will be displayed by most host systems when “discovering” the printer. When
shipped from the factory, the default value for the Bluetooth Local Name is “MLP 3040-aaannnnn” where
aaannnnn” is the printer’s serial number. This name may be changed to any combination of letters, numbers,
dashes, underscores, and SPACEs. The name may be up to 16 characters in length.
To advance through the character positions of the name, press the
Advance Button. To change the character
at the current position, press the
Increment Button. The order of characters that may be selected is
“0123456789 ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz - _ SPACE”.
Address
Address
0080371B8F32
Possible Values: Twelve digit hexadecimal string.
This feature displays the unique hardware value associated with the particular Bluetooth interface installed in
the printer. This value is set by the hardware manufacturer, is guaranteed to be unique for each interface, and
may not be changed.
Wi-Fi Interface
INTERFACE MENU
Wi-Fi
Note that “Wi-Fi” must be displayed on the bottom line of the display in order to access the following features
and for this interface to be active when Setup is exited.
Emulation
Emulation
Printek
Possible Values: Printek*, O’Neil, ZPL-II, Mt3, CPCL, Hex Dump
This feature sets the family of printer commands that may be used by a host application program to control the
various capabilities of the printer. The printer will only respond to commands valid for the currently selected
emulation. For more information, please refer to the MLP 3040 Series Programmer’s Manual.
26