Filter
Top Products
6 – Fabric Element MIB Objects
6-4 59047-03 B
A
6.3
Module Table
The objects described in this section are in table format indexed by switch. An
example of how to access one of these objects is: "snmpget localhost public
fcFeModuleDescr.1". This table contains one entry for each module.
fcFeModuleDescr (1.3.6.1.2.1.75.1.1.4.1.2)
A textual description of the module. This value should include the full name and
version identification of the module.
Syntax
SnmpAdminString
Access
read-only
Status
current
Return Value
A configurable description of the module table entry. The defaults are
SANbox2-8 = SANbox2-8 FC Switch, SANbox2-16 = QLogic SANbox2 FC
Switch, SANbox2-64 = SANbox2-64 FC Switch, SANbox 3050 = SANbox
3050 FC Switch, SANbox 3100 = SANbox 3100 FC Switch, and SANbox 5200
= SANbox 5200 FC Switch.
fcFeModuleObjectID (1.3.6.1.2.1.75.1.1.4.1.3)
The vendor's authoritative identification of the module. This value may be
allocated within the SMI enterprises subtree (1.3.6.1.4.1), and provides a means
for determining what kind of module is being managed.
For example, this object could take the value 1.3.6.1.4.1.99649.3.9 if vendor
“Neufe Inc.” was assigned the subtree 1.3.6.1.4.1.99649, and had assigned the
identifier 1.3.6.1.4.1.99649.3.9 to its FeFiFo-16 PlugInCard.
Syntax
OBJECT IDENTIFIER
Access
read-only
Status
current
Return Value
The module identification numbers are: SANbox2-8 =
1.3.6.1.4.1.1663.1.1.1.1.14, SANbox2-16 = 1.3.6.1.4.1.1663.1.1.1.1.11,
SANbox2-64 = 1.3.6.1.4.1.1663.1.1.1.1.12, SANbox 3050 =