Filter
Top Products
2 – Using SANbox Manager
Starting SANbox Manager
2-6 59048-01 A
2.2
Starting SANbox Manager
To start the SANbox Manager application for the first time, choose one of the
following methods:
■ For a Windows platform, double-click the SANbox Manager shortcut, or
select SANbox Manager from Start menu, depending on how you installed
the SANbox Manager application.
■ For a Linux platform, enter the following on the command line:
# /SANbox_Manager/SANbox_Manager
■ For a Solaris platform, enter the following on the command line:
/usr/opt/QLGCsol/bin/SANbox_Manager
The SANbox Manager application opens with the display shown in Figure 2-1.
Figure 2-1 SANbox Manager Window
If the default fabric view file exists, the system prompts you to enter the file
password as shown in Figure 2-2. Enter the password and choose the Load View
File button to open the SANbox Manager application and load a previously saved
set of fabrics. Otherwise, choose the Continue Without Loading button to open
an empty fabric view. Choose the Add button to open the Add a New Fabric
window shown in Figure 2-3.