Filter
Top Products
CHAPTER 2. INSTALLATION
ACTIVE Professional External Modem User’s Manual
2
CHAPTER 2. INSTALLATION
Carefully unpack the product package that you have received and check the
contents as following:
n The modem equipment
n Telephone cable
n 5V DC power adapter & power cable
n Modem cable: 9 pins male to 9/25 pins female
n Digital User’s Manual (Download from www.quantum.com.hk)
The Rear View: 560UF/L & 560UF/D External Modem
Line Jack
Only use the middle 2 pins (Pin 2 & Pin 3) to connect to the “Line” jack
of the modem.
SERIAL PORT
For pin assignment, please refer to Appendix D
Install your external modem
1. Power off the computer or terminal and the modem.
2. Modem cable: Connect the 9-pins male modem cable to the “Serial
Port” of the modem. Tighten the screws.
Connect the other end of the modem cable ( 9-pins & 25-pins female)
to the serial port of your Computer or terminal. Tighten the screws.
3. Telephone Line cable: Connect one end the phone cable to the “Line”
jack of the modem and the other end to the telephone line or leased-
line jack..
4. Power Adapter: Connect the 5VDC power adapter jack to the “5V
DC” port of the modem. The other end of the power cable to the
110/220 power socket.
5. Power on the computer or terminal and the modem. Configure the
modem by issuing the appropriate AT commands or using the front
panel switches.
6. The modem is ready for operation.