Filter
Top Products
12. You are required to manually configure the QS-100D to match the
resources allocated by Windows 95. Another option is to use the “Device
Manager” in Windows 95 to change the system resources allocated in
Windows 95 to match your preferences. See chapter 2 for information on
installing and configuring the QS-100D.
3.2 Viewing and Changing Resources with Device Manager
The following instructions provide step-by-step instructions on viewing and
changing resources of the QS-100D in Windows 95 using the “Device Manager”
utility. Select Start|Help from within Windows 95 for additional information on
this utility.
1. Double click the “System” icon inside the Control Panel folder. This
opens up the System Properties box.
2. Click the “Device Manager” tab located along the top of the System
Properties box. This lists all hardware devices registered inside the
Windows 95 registry. Additional information is available on any of these
devices by click on the device name and then selecting the “Properties”
button.
3. Double click the device group “Multi-function Adapters”. The QS-100D
model name should appear in the list of Multi-function adapters.
4. Double click the QS-100D model name and a properties box should open
for the hardware adapter.
5. Click the “Resources” tab located along the top of the properties box.
Confirm that the resources Windows 95 has allocated for the QS-100D
match the hardware configuration. To modify any of the resource settings
click the resource name and click the “Change Setting” button. Click
“Cancel” to exit without making changes.
QS-100D User's Manual 3-3