Filter
Top Products
Chapter 5 Setup Menu FCD-IPM Installation and Operation Manual
5-18 Routing/Bridging Menu
Table 5-9. IP Address Pool Setting (DHCP) (Cont.)
Values Description
DHCP
This protocol is an extension to BOOTP and permits FCD-IPM to
supply not only an IP address but also additional parameters, such as
Default Gateway, DNS server addresses etc. FCD-IPM supplies these
parameters to the client's workstation. In contrast to BOOTP, DHCP
supplies these parameters on a temporary basis. FCD-IPM using DHCP
checks on the workstation periodically. If the workstation is not using
the IP address, the IP address can be supplied to other workstations
later.
FCD-IPM supports all these mechanisms simultaneously.
IP Address Pool
Select this option to define IP address information.
IP ADDRESS POOL (Device name FCD-IPM)
----------------
Pool of IP addresses dynamically allocated by the device working as Remote
Access server or DHCP server to workstations over the WAN/LAN.
Allocation can be made via DHCP, BOOTP, and PPP-IPCP request.
1. IP Address 001.001.001.001 – 001.001.001.005 Mask: 255.255.255.000
Default gateway: 001.001.001.001
Primary DNS: 194.090.001.005, Secondary DNS: 000.000.000.000
Interface: LAN 1
OPTIONS: C-Clear all, E-Edit, D-Delete, A-Add
Press one of the above or ESC to return to previous screen:
Figure 5-19. IP Address Pool Menu
You can define up to five entries. Each entry contains the parameters shown in
Table 5-10.