Filter
Top Products
Chapter 5 Setup Menu FCD-IPM Installation and Operation Manual
5-6 Host Parameters Menu
Internet
Central Access
Router
FCD-IPM
LAN Interface IP address
should be Default Gateway
for all stations on LAN
Figure 5-7. Default Gateway
It is very important to obtain the correct parameters from the system administrator
or ISP. The most common problem when establishing an IP connection is incorrect
configuration of the IP parameters and default gateway. Do not try to guess these
parameters.
SNMP Manager Table
MANAGER TABLE SETTING ( Device name - FCD-IPM)
---------------------
IP address Mask
1. 010.000.000.222 Yes
OPTIONS: C-Clear all, E-Edit, D-Delete, A-Add
Press one of the above or ESC to return to previous screen:
Figure 5-8. SNMP Manager Table Menu
Select this option to add, clear or delete parameters from the manager table. The
manager table lists the SNMP manager IP addresses and masks. Simple Network
Management Protocol (SNMP) manager IP address is the IP of the management
station, which the traps are sent to (NMS). To send traps to that NMS, set the mask
parameter to YES.
SNMP is an application-layer protocol designed to facilitate the exchange of
management information between network devices. By using SNMP to access
management information data (such as packets per second and network error
rates), network administrators can more easily manage network performance and
find and solve network problems.
Note
Advanced Menu
↓1
Setup Menu
↓1
Host Parameters Menu
↓3
SNMP Manager Table